Excessive Bending Of The Cable; Mounting On A Nozzle; Interference Between Two Tdr's - Bindicator TDR-1000 Quick Start Manual

4.1 Excessive bending of the cable

BE CAREFUL NOT TO BEND OR KINK
CABLES TOO MUCH

4.2 Mounting on a nozzle

4.3 Interference between two TDR-1000
There must be at least 6.5ft between
devices if installed in the same vessel.
®
BINDICATOR
Avoid nozzle size higher than 5.9",
especially when B < 3.1".
Try to ensure A does not exceed B.
6.5 ft
Installation, Operation & Maintenance Manual
2