Bindicator TDR-1000 Quick Start Manual page 2

SAFETY INFORMATION
Before installing the TDR-1000 model, please read these instructions and familiarize
yourself with the requirements and functions. If any questions or problems arise during
®
the installation, please contact Bindicator Applications at 1-800-778-9242.
The TDR-1000 model must only be installed and operated as described in this operating
®
instruction. Please note that other action can cause damage for which Bindicator does
not take responsibility. If the model is not installed correctly or used in approved
applications, dangers may arise such as product overflow.
Ensure that all personnel installing, wiring, and calibrating this device are suitably
qualified.
Observe all local and national electrical codes for the wiring of this device.
The TDR-1000 level gauge is designed solely for measuring the distance, level and
volume of liquids, solids and particulate materials.
Special codes and regulations apply to its use in hazardous areas.
Responsibility as to suitability and intended use of these level gauges rests solely with
the user.
Improper installation and operation of our level gauges may lead to loss of warranty.