National Instruments PCI-1200 User Manual page 86

Index
Symbols
+5V signal (table), 3-4
A
ACH<7..0> signal
definition (table), 3-2
input ranges (table)
bipolar analog input, 3-5
unipolar analog input, 3-5
ACK* signal (table), 3-27
A/D FIFO, 4-7
AGND signal (table), 3-3
AISENSE/AIGND signal
analog common signal, 3-4
definition (table), 3-2
analog input
circuitry, 4-6
figure, 4-5
configuration. See analog input
configuration
DAQ operations, 4-7
controlled acquisition mode, 4-8
freerun acquisition mode, 4-8
interval scanning acquisition mode, 4-8
multiple-channel scanned data
acquisition, 4-9
single-channel data acquisition, 4-9
DAQ rates, 4-9
maximum recommended rates
(table), 4-10
settling time vs. gain (table), 4-10
input modes. See analog input modes
polarity
configuration, 2-3
settings (table), 2-2
© National Instruments Corporation
signal connections. See analog input signal
connections
specifications, A-1
theory of operation, 4-5
analog input configuration, 2-2
analog I/O settings (table), 2-2
differential connections
purpose and use, 3-9
recommended input configurations
(table), 3-8
floating signal sources
differential connections, 3-11
recommended input configurations
(table), 3-8
ground-referenced signal sources
differential connections, 3-10
recommended input configurations
(table), 3-8
input modes, 2-4
input polarity, 2-3
analog input modes, 2-4
DIFF
See also differential connections
definition (table), 2-4
purpose and use, 2-5
recommended input configurations
(table), 3-8
NRSE
definition (table), 2-4
purpose and use, 2-5
recommended input configurations
(table), 3-8
single-ended connections for
ground-referenced signal
sources, 3-13
RSE
definition (table), 2-4
purpose and use, 2-4
I-1 NI PCI-1200 User Manual