Tappers - Bosch 1375-01 Catalogue

TAPPERS.

tappers for threads up
to 8 mm in diameter
HGR 55/10
The machines come equipped with a special 4-m-long cable without plug.
52
0 602 463 101 265 200 8 6
0 602 463 104 135 200 8 6
0 602 463 107 72 200 8 6
3–10 380 750 260 150 0.9 2.3 Cone B 12 DIN 238
3–10 380 750 260 150 1.7 2.3 Cone B 12 DIN 238
3–10 380 750 260 150 3.2 2.3 Cone B 12 DIN 238
Your specialist dealer can provide you with information on the complete set of quality accessories.
Two-jaw drill chuck 3 608 573 000
Fastening key
for 3.0 mm high 3 603 111 004
for 3.3 mm high 3 603 111 005
for 3.6 mm high 3 603 111 003
Spare key 2 607 950 012
53