Replacing The System Board - Fujitsu PRIMERGY RX200 S4 Service Supplement Manual

Replacement routines
Ê Connect all cables on the fan board, the SAS board and the system board
(see the cabling plan in the Options Guide).
Ê Push the power supply unit(s) entirely in place.
Ê Close the server and plug in the power plugs (detailed description see the
Options Guide).
4.8

Replacing the system board

Ê Open the server as described in the
Ê Remove all external cables.
Ê Lift up the air duct and take it out as described in the
air duct" on page
Ê Remove the memory modules (description see the Options Guide).
Ê Remove the heat sinks and the processors (description see the Options
Guide).
Ê Remove the riser card holder (description see the Options Guide).
Ê Unplug all cables from the system board.
RX200 S4
19.
Service Supplement
Replacing the system board
section "Preparation" on page
section "Removing the
17.
27