Fujitsu PRIMERGY RX200 S4 Service Supplement Manual page 18

Preparation
Ê If the pulled-out server is difficult to access in the rack, remove it completely
from the rack. If you do not want to remove the server, skip this page.
V
CAUTION!
The server has no cable management in the rack!
Therefore you must unplug all cables connected to server before you
remove it.
V
CAUTION!
At least two people are needed to remove the server from the
rack.
Figure 3: Removing the server from the rack
Ê Press in the safety springs (1) on both sides, and carefully pull the server
further toward you (2).
Ê Pull the server out of the rails and place it on a table, for example.
18
2
1
Service Supplement
Replacement routines
CSS
T T
COM PAC COM PAC
RX200 S4