Optional) Independent Deployment Ai/Di Unit - Huawei FusionModule500 Product Description

FusionModule500 Smart Mini Data Center
Product Description (ECC800e)
Table 3-19 Wireless network pairing and IP address reset buttons
Name
SW
Default

3.4.3 (Optional) Independent Deployment AI/DI Unit

If the AI/DI expansion card inserted into the ECC800e cannot meet the AI/DI collection
quantity requirements, connect an independent deployment AI/DI unit to the RS485 port on
the ECC800e. The independent deployment AI/DI unit supports eight AI/DI inputs to collect
AI/DI signals.
Figure 3-16 Front panel of the independent deployment AI/DI unit
(1) DC 15 V power input port
(4) Cascading ports
Issue 05 (2019-11-22)
Function
WiFi pairing button
IP address reset
Copyright © Huawei Technologies Co., Ltd.
Function Description
Reserve
Press and hold down the
button for 3s. Then the IP
address for the ECC800e
WAN port will restore to the
default address 192.168.1.10.
(2) Indicators
(5) AI/DI_1 to AI/DI_8
3 System Architecture
Status
1. When the system
enters the pairing
mode, the RUN
indicator is
steady on.
2. When the pairing
succeeds, the
RUN indicator is
steady on.
3. If pairing does
not succeed for 3
minutes, the
RUN indicator
blinks just as
before WiFi
pairing.
N/A
(3) DIP switch
(6) Ground point
40