INSTRUCTIONS FOR MODELS
SA-2402
For additional assistance or service please contact:
SPEAKMAN
®
Company
400 Anchor Mill Road
New Castle, DE 19720
800-537-2107
customerservice@speakman.com
www.speakman.com
92-SA-2402-01
3
Align Mounting Plate over center point marked
in previous step. Mounting Plate should be
vertical as shown below. Mark Mounting Screw
locations onto the wall surface. Remove items
after marking mounting locations.
7
Place Accessory (1) over Mounting Bracket and
secure the pre-installed set screw (2) with a small
Flat Tip Screwdriver.
TOOLS AND SUPPLIES
Pencil
Phillips
Screwdriver
Drill
Mounting Hardware
(included)
Phillips
Drill Bit
3
Drive Bit
Ø
/
"
16
Measuring
Tape
4
If mounting directly to wood stud, Plastic Anchors
are not required. If mounting to drywall or tile,
select appropriate
3/16"
holes at marked locations.
OR
OR
8
Orient the Hand Held Shower Bracket to your
desired position. Adjustments are made by
pressing the Locking Button (1) to release
the position and releasing to lock into the
desired position.
X2
IMPORTANT
• Do not over-tighten any connections or damage
may occur.
• Be sure to read instructions thoroughly before
beginning installation.
Small Flat Tip
Screwdriver
SAFETY TIPS
• Cover your drain to prevent loss of parts. Be sure
to wear eye protection.
1
If the Mounting Plate(s) (1) come pre-installed in the
Accessory (2), remove the Mounting Plate(s) by
Tile Drill Bit
loosening (but not removing) the pre-installed set
3
Ø
/
"
16
screw at bottom with a small Flat Tip Screwdriver.
Level
5
Insert Plastic Anchors into drilled holes and
press/tap into place until the head is flush to the
drill bit and drill guide
wall surface.
may not be suitable for all types of wall
construction, seek professional help if in doubt).
3
Ø
/
"
16
X4
MAINTENANCE
Your new Speakman Product is designed for years of
trouble-free performance. Keep it looking new by
cleaning it periodically with a soft cloth. The use of harsh
chemicals and abrasives on any of the Speakman custom
finish products may damage the finish and void the
product warranty. Please be sure to only use approved
cleaners. Please contact Speakman for any clarification
of acceptable cleaners.
WARRANTY
Additional warranty information can be found at:
www.speakman.com
2
X2
6
(Note: Plastic Anchors provided
X4
At the selected height, mark center point of
mounting locations onto wall referencing the
rough in diagram.
Secure Mounting Plate with the Mounting Screws
provided. Verify that the Mounting Plate is
aligned vertically.
Need help?
Do you have a question about the SA-2402 and is the answer not in the manual?
Questions and answers