Speakman SA-2403 Instructions

INSTRUCTIONS FOR MODELS

SA-2403
TOWEL RACK
SA-2404
TOWEL RING
SA-2405
PAPER HOLDER
SA-2406
ROBE HOOK
SA-2407
TOWEL BAR
SA-2408
DOUBLE ROBE HOOK
SA-2410
DOUBLE PAPER HOLDER
For additional assistance or service please contact:
SPEAKMAN
® Company
400 Anchor Mill Road
New Castle, DE 19720
800-537-2107
customerservice@speakman.com
www.speakman.com
92-SA-2400-02

TOOLS AND SUPPLIES

Pencil Level
Phillips Hex Key Drill
Screwdriver (included)
Drill Bit Phillips
3
Ø / " Drive Bit
16
IMPORTANT
• Do not over-tighten any connections or damage
may occur.
• Be sure to read instructions thoroughly before
beginning installation.

SAFETY TIPS

• Cover your drain to prevent loss of parts. Be sure to
wear eye protection.
• If mounting to a tile surface, ensure you acquire
appropriate mounting hardware capable of supporting
the accessory in use. Follow the instructions included
with the manufacturer's mounting hardware.

MAINTENANCE

Your new Speakman Product is designed for years of
trouble-free performance. Keep it looking new by
cleaning it periodically with a soft cloth. The use of harsh
chemicals and abrasives on any of the Speakman custom
finish products may damage the finish and void the
product warranty. Please be sure to only use approved
cleaners. Please contact Speakman for any clarification
of acceptable cleaners.

WARRANTY

Additional warranty information can be found at:
www.speakman.com
1
If the Mounting Plate(s) (1) come pre-installed
in the Accessory (2), remove the Mounting
Plate(s) by loosening (but not removing) the
pre-installed set screw at bottom with the
included Hex Key.
2
At the selected height, mark center point of
mounting locations onto wall referencing
the rough in diagram.