Intercom Pairing; Troubleshooting; Intercom Start/End; Setting - Sena SMART HJC 10B Manual

Intercom Pairing

1. Press and hold the Center Button of two headsets for 5 seconds until red LEDs of both units start
to flash rapidly.
2. Simply tap the Center Button of any one of the two headsets.

Intercom Start/End

Tap the Center Button once.

Setting

Configuration Menu: Press the Center Button for 12 seconds.

Troubleshooting

Factory Reset

If you want to restore the headset to factory default settings, use the Factory Reset in the configuration
menu. The headset automatically restores the default settings and turns off.

Fault Reset

When the headset is not working properly, you can easily reset the
unit:
• Gently insert a paperclip into the hole and tap the Fault Reset
• The headset will shut down.
Button with light pressure.