Table of Contents
Advertisement
(on some models)
TOOLS NEEDED:
5/16-inch hex-head socket wrench, No. 2 Phillips screw-
driver, flat-head screwdriver,
M-inch open-end wrench.
SUGGESTION:
Reversing the door swing should be
performed by a qualified person.
IMPORTANT
INFORMATION:
0 Before you begin, turn refrigerator OFF, unplug it, and
remove any food from door shelves.
0 When removing hinges, keep doors closed until ready to
lift free from cabinet.
0 To remove doors, start at the top hinge and work your
way down.
0 To replace doors, start at the bottom hinge and work
your way up.
0 Line up doors so they are centered between the sides of
the cabinet and parallel with each other.
0 Seal all unused openings with screws or plastic plugs.
Moisture will enter any openings.
NOTE: After the doors are reversed, reinstall the handles.
If the doors are not shutting on their own, see "Leveling"
in the "Installing
Your Refrigerator"
section.
Reveninp the hinpes
TOP HINGE
CENTER HINGE
BOlTOM
HINGE
25
Advertisement
Table of Contents
