To wash molded-in-color panels follow the instructions below:
1. Rinse surface with water.
2. Wash with Harley Wash or Harley Sun Wash.
3. Rinse surface thoroughly with water.
4. Dry with a clean chamois or soft dry natural fiber cloth.
Cleaning Between Washings
Untreated molded-in-color body panels sometimes have a static charge that attracts dust.
Applying Harley Gloss or Harley Glaze Polish and Sealant to molded-in-color surfaces
will eliminate this condition.
To keep a high gloss finish on molded-in-color panels follow the instructions below:
1. Spray Harley Gloss onto surface and wipe with a clean soft natural fiber cloth or
Harley Softcloth.
NOTE:
Rain or water will remove Harley Gloss from body panels.
2. Reapply Harley Gloss as required to keep surfaces looking their best.
Polishing
Polishing molded-in-color body panels results in greater surface gloss and a protective
coating.
Apply Harley Glaze Polish and Sealant every six months or as required to keep molded-
in-color panels protected and looking their best.
1. Clean and dry surfaces to be polished. See Washing.
2. Apply Harley Glaze Polish and Sealant to clean, slightly dampened cloth or
sponge and apply to surface with a light overlapping motion. Make sure to cover
all areas.
3. Let Harley Glaze Polish and Sealant dry to a haze and buff off residue with a
clean soft cloth or Harley Softcloth.
Minor Scratch Removal
https://www.motorcycle-manual.com/