Advertisement
DPD01156B
Flange Mount Kit for Frame FS4
1
M4x16
M4x12
3
M3.5x10
4
5
2
FS4 Flange Mounting
If your drive is the Type 1/IP21-protected and there is the risk that dust or other impurities in the cooling air
might end up inside the control unit, start the mounting with actions described in the steps 1 to 4.
If this is not needed, install the flange mounting kit proceeding directly to the step 5. Note, in this case the rear
will not be according to the Type 12/IP54.
The kit consists of:
1. Top collar, (70CMR00281)
2. Bottom collar, (70CMR00280)
3. Side collars (2 pcs), (70CMR00282)
4. Internal fan, (70CPE00132, 70CPE00056) depends on the
control unit
5. Sealing plug (3 pcs), (70CMR00324)
Additionally:
• 8 screws size 4x16 (for the top and bottom collar mounting)
3
• 3 screws size 4x12 (for the side collar mounting)
• 2 screws size 3.5x10 (for the bottom collar mounting)
9266.emf
Siemens Industry, Inc.
7
Advertisement
