Advertisement
Siemens Industry, Inc.
Flange Mount Kit for Frame FS5
1
M4x16
M4x12
3
M4x10
4
5
2
FS5 Flange Mounting
If your drive is the Type1/IP21-protected and there is the risk that dust or other impurities in the cooling air
might end up inside the control unit, start the mounting with actions described in the steps 1 to 4.
If this is not needed, install the flange mounting kit proceeding directly to the step 5. Note, in this case the rear
will not be according to the Type12/IP54.
12
The kit consists of:
1. Top collar, (70CMR00176)
2. Bottom collar, (70CMR00175)
3. Side collars (2 pcs), (70CMR00090)
4. Internal fan, (70CPE00056)
5. Sealing plugs (4 pcs), (70CMR00324)
Additionally:
• 8 screws size 4x16 (for the top and bottom collar mounting)
3
• 4 screws size 4x12 (for the side collar mounting)
• 2 screws size 4x16 (for the mounting of the internal fan)
9268.emf
DPD01156B
Advertisement
