Phonak Roger Manual/Faq

Better Sound Limited
Phone: 020- 7482 0177 Fax: 020- 7482 2677
Phonak Roger Guide/FAQ

1. Battery compartment

2. Nylon tab/removal handle

3. Wax guard (green)

How to insert/exchange battery

Remove the protective foil from the battery. Wait for two minutes before inserting,
to activate the battery.
Open the battery door on the Roger Earpiece, and hold the earpiece so the door is
on the right. Insert the battery in to the door with the "+" symbol on the battery
facing towards you.
Please Note:
• Open and close the battery compartment gently and carefully.
• You will feel resistance when closing the battery compartment due to the battery
contact springs. If you feel a strong resistance, check to make sure the battery is
correctly inserted and facing in the correct direction.
• When the Roger Earpiece is not in use, it is recommended to completely open the
battery door to turn the device off. However please note that the battery will keep
discharging even with the battery door open.

Switching on and off

Switch the Roger Earpiece on by closing the battery compartment
To switch the device off, open the battery compartment fully.

How long do the batteries last?

Premium quality P10/10ZA/ A10 batteries last between 6-10 Hrs (continuous operation). However once the sticker/tab
on the battery has been removed the battery will deteriorate whether in use or not. Therefore batteries should be
exchanged regularly i.e. at least once a day. The user will be warned with a
beep sequence (see next page) that the battery is getting weak.

How to insert/remove the Roger earpiece

Carefully guide the earpiece in to the ear canal. The earpiece should be
positioned as far as possible in to the ear canal whilst ensuring that it feels
comfortable. Depending on the shape of the ear canal, it may be necessary
to twist the earpiece gently into place to ensure the best fit.
The earpiece is removed by pulling on the nylon tab.

Pairing Roger Earpiece with transmitter

N.B. Better Sound sends out kits with the pairing already completed, so
the kit is ready for use straight out of the box.
To connect a Roger Earpiece to a Roger BaseStation or a Roger
Touchscreen Mic for the first time, hold it within 10 cm of the transmitter
and briefly press the Connect button on the front panel. Only one Roger
Earpiece can be connected at a time. Keep any other Roger devices out
of range during this process. An unlimited number of Roger Earpieces can
be connected. Pairing of a Roger Earpiece is only necessary the first time
it is used. The Roger Earpiece will then remain connected with the Roger
BaseStation, even if either device is restarted.
31 Cathcart Street, London, NW5 3BJ
admin@bettersound.co.uk
e-mail: