Phonak Roger Faq Manual

Better Sound Limited
Phone: 020- 7482 0177 Fax: 020- 7482 2677
Phonak Repeater Guide/FAQ
1. On/Off button – push & hold > 3 seconds

2. Status indicator light(s)

3. Connect button (for Roger earpieces only)

4. Micro-USB power/charging socket

Pairing Roger Repeater with transmitter

N.B. Better Sound sends out kits with the pairing already completed, so the kit is ready for use straight out of the box.
To connect a Roger Repeater to a Roger
BaseStation or a Roger Touchscreen Mic for the
first time, hold it within 10 cm of the transmitter (TX)
and briefly press the Connect button on the front
panel (of the TX). Keep any other Roger devices out
of range during this process. An unlimited number of
Roger Repeaters can be connected. Pairing of a
Roger Repeater is only necessary the first time it is
used. The Roger Repeater will then remain
connected with the Roger TX, even if either device
is restarted.
Pairing Roger Earpiece with Roger BaseStation/Touchscreen Mic/Repeater
To connect a Roger Earpiece for the first time, hold it within 10
cm of the TX/Repeater and briefly press the Connect button on
the front panel. Only one Roger Earpiece can be paired at a time.
Keep any other Roger devices out of connection range during
this process. An unlimited number of Roger Earpieces can be
connected. Pairing of a Roger Earpiece is only necessary the first
time it is used. The Roger Earpiece will then remain connected
with the Roger TX/Repeater, even if either device is restarted.
For optimum Repeater placement see guide to status lights – Audio broadcast range (overleaf)
The Roger Repeater extends the range of Phonak's Roger Earpiece
An unlimited number of Repeaters may be used
31 Cathcart Street, London, NW5 3BJ
admin@bettersound.co.uk
e-mail: