System Registration - Lippert Components OneControl ConnectAnywhere Manual

ONECONTROL

System Registration

The KCoDE (Fig. 4A) is automatically read during activation when using the OneControl app.
NotE: If registering on-line using a desktop or laptop PC, the KCoDE will have to be entered manually.
To register the ConnectAnywhere system, do as follows:
1.
Go to https://lippert.force.com/IoTCommunity/register.
2. Follow the program prompts (Fig. 14).
Rev: 02.12.19
CONNECTANYWHERE
®
ELECTRONICS
Fig. 14
Page 9
ACTIVATION
TM
CCD-0001843