Lippert Components OneControl ConnectAnywhere Manual page 3

ONECONTROL
Data Package Required
ConnectAnywhere
and 4G LTE bands 2, 4 & 12.
• Purchase of a nano sim card and data package is required.
The AT&T and Rogers
®
respectively.
Activation of the ConnectAnywhere system requires access to an existing Internet connection
AT&T or Rogers standard size SIM card and data package.
the IMEI number is a unique 15-digit serial number given to every mobile phone. the IMEI number should
be treated and protected the same as a Personal Identification Number (PIN) to prevent unauthorized
access to the system. Use care when placing additional product labels that show product-sensitive
Before visiting AT&T® or Rogers™ (CAN), make sure to have the IMEI (International Mobile Equipment Identity) number
available. The IMEI number is printed on the OneControl ConnectAnywhere Cellular Gateway label (Fig. 3C).
NotE: The IMEI number is a unique 15-digit serial number given to every cellular mobile device, which can
then be used to check information such as the phone's Country of Origin, the Manufacturer and it's
Model Number.
Whether currently an AT&T Wireless or Rogers (CAN) customer or not, contact AT&T or Rogers (CAN) customer
service or visit the nearest AT&T Wireless or Rogers corporate store to get either a standard size SIM card, or a nano
size SIM card for insertion into the provided SIM card adapter (Fig. 1D).
Make sure to have the provider set up the SIM card for a hotspot.
†
System connectivity is subject to carrier coverage map.
Rev: 02.12.19
CONNECTANYWHERE
®
ELECTRONICS
A
is certified with AT&T and Rogers
® ®
(CAN) trade names and logos are registered trademarks of AT&T
TM
information, such as SSID, PASSWoRD and IMEI number.
TM
Fig. 4
(CAN) cellular service using 3G bands II, IV, V
TM
Page 3
ACTIVATION
and Rogers (CAN).
® TM
and the use of an
†
CCD-0001843