Using The Toothbrush - Panasonic EW‑PDP51 Manual

Using the toothbrush

• The appliance may not operate in an ambient
temperature approximately 5 °C or lower.
• Do not put the main unit in contact with hair products,
hand creams, etc.
Doing so may damage the exterior.
1
Place the brush head firmly
onto the toothbrush shaft�
• Ensure that the direction is
correct.
Align the front of the main
unit and the front of the
brush head.
• Do not attach the brush head
by twisting it into place.
Doing so may damage the brush head and main unit.
• The toothbrush shaft will move when a force is
applied. This is required for operation, and is not
a malfunction.
• There is a small gap between the
brush head and the main unit (a
few mm). This is necessary for
operation and is not a malfunction.
2
Place the toothbrush in your mouth�
To avoid spattering of toothpaste, put the brush
head in your mouth before turning the power on.
• Apply a small amount of toothpaste.
3
Press the power switch to turn on the
main unit�
• When first using this appliance, some
people may experience a tickling or
tingling sensation caused by the sonic
vibrations.
The sensation should subside after you
use the toothbrush several more times.
• A sound may be heard when the brush
head is pressed too strongly against
the teeth, but this is not a malfunction.
4
Select the mode�
• Each time you press the
power switch, the mode
changes.
The selected mode indicator
will glow.
• To switch the mode, press
the power switch within
5 seconds. (Diagram:
• The power is turned OFF
when the power switch is
pressed after operating for 5
seconds or longer in each
mode. (Diagram:
[ : 5 seconds or
)
longer]
[ : Within
5 seconds]
)
35