Advertisement
Using the toothbrush
1. Remove the cap. (Fig. 2)
2. Confirm that the brush head is fixed firmly. (Fig. 8)
3. Place the toothbrush in the mouth.
• When using the toothbrush, especially with
toothpaste applied, place the brush head in the
mouth before operating to prevent splattering.
4. Press the power switch firmly to operate the toothbrush.
• Each time you press the power switch, the
appliance switches according to the following
order: "Power ON/LED lamp ON", "Power ON/
LED lamp OFF", "Power OFF/LED lamp OFF".
• Press the power switch with the ball of the finger.
10
• Do not press with a fingernail. Doing so may
tear the rubber of the power switch.
5. Brush the teeth by moving the main unit by hand.
• Brush by moving the toothbrush in the same
way as when you brush by hand. Just applying
the toothbrush to teeth cannot fully remove
plaque, so it is recommended that you move the
toothbrush. (See pages 11-13.)
• Do not apply the brush head to teeth or gums
too strongly.
6. When finished brushing, stop the motion by
pressing the power switch firmly.
• In order to prevent splattering of saliva, etc., turn
off the toothbrush while it is still in the mouth.
Advertisement
