Samsung SMT-i3100 Self Help Manual page 2

SMT-i3100/3105
Placing a Call
Either lift the handset or press the speaker button (
Ending a Call
Place the handset on hook.
Answering a Call
Lift the handset or press the speaker button (
Holding and Resuming
To place a call on hold, press the hold key (
To resume the call, press the hold key (
Transferring a Call
Whilst in a call, press the transfer button (
transferred (If it is an external number, dial 9 followed by the number). Then place the handset on hook.
Dialling from a Phonebook
Press the phone book button (
Press the OK button to place the call.
Dialling a Speed Dial Number
Enter a speed dialling number and hold down the last digit until the phone rings.
Dialling a Previously Called Number
Press the call log button (
Press the OK button to place the call.
Call History
Press the call log button (
3-Way Conferencing
Ensure you are all an active call with one of the parties with whom you wish to create a conference.
Press the conference button (
number, dial 9 followed by the number).
You can add a further 3 parties by repeating the two steps above.
To begin the call, press the conference button again (
Volume Control
When your phone is either ringing or idle, press the volume keys (
an active call, press the volume control keys (
whichever is active.
Commsplus technical support: 01934 882222
) Then dial 9 followed by the number you wish to call.
).
) once.
) again.
) and enter a phone number or DDI to which the call will be
) then navigate the menu using the buttons.
) then navigate to the desired number.
) to view a log of the call history.
) once and enter the conference target's number or DDI (If it is an external
).
) to adjust the ring volume. During
) to adjust the handset or speakerphone volume,
Self Help Manual