Technical Specifications - Grizzly ARM 4038 Lion-Set Translation Of The Original Instructions For Use

GB

Technical Specifications

Cordless ..................................................
lawnmower ..............ARM 4038 Lion Set
Motor voltage ...................... max. 40 V
Idling speed n ..........................3300 min
0
Idle time ................................max. 30 min*
Cutting circle ............................... 380 mm
Cut height ................................ 25-75 mm
Lawn bag volume ...............................40 l
Protection class ......................................III
Protection type .................................. IP21
Weight (without battery/charger) ...... 17 kg
Sound pressure specification
(L ) ..................... 72,1 dB (A); K
pA
Noise level specification (L
guaranteed ..............................92 dB(A)
measured ......83,3 dB(A); K
Vibration (a ) ........... 2,53 m/s
h
Battery (Li-Ion) ......................... DYMA81
Nominal voltage ............... max. 40 V
Capacity ...................................... 2,5 Ah
Energy ......................................... 90 Wh
Charging time ...................approx. 2.5 h
Recharger ................................. DYMA82
Voltage
input .................. 220-240 V~, 50 Hz, 0,6 A
Voltage output ........................40 V
Protection class ..............................
Protection category ........................ IP20
* The effective service life of a fully charged
battery under load depends on the mode of
operation and the level of use.
40
-1
=3 dB
pA
)
WA
=3,65 dB
WA
; K=1,5 m/s
2 2
1 A
II
Noise and vibration values were deter-
mined according to the standards and
stipulations mentioned in the declaration
of conformity.
Technical and optical changes can be
carried out in the course of further deve-
lopment without notice. All dimensions,
references and information of this instruc-
tion manual are therefore without guaran-
tee. Legal claims, which are made on the
basis of the instruction manual, cannot
thus be considered as valid
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another. The
stated vibration emission value may also
be used for a preliminary exposure as-
sessment.
Warning:
The vibration emission value may
differ during actual use of the
power tool from the stated value
depending on the manner in which
the power tool is used.
Safety precautions aimed at pro-
tecting the user should be based
on estimated exposure under
actual usage conditions (all parts
of the operating cycle are to be
considered, including, for examp-
le, times during which the power
tool is turned off and times when
the tool is turned on but is running
idle).