Bacnet Data Link Layer Options - United Technologies Carrier Unit Vent Open Integration Manual

BACnet Data Link Layer Options

BACnet Data Link Layer Options
Data Link Layer Options
-3, Ethernet (Clause 7)
XX ANSI/ATA 878.1, RS-485 ARCNET (Clause 8) baud rate(s) 156k baud
XX MS/TP master (Clause 9), baud rate(s): 9600, 19200, 38400, 76800
-To-Point, EIA 232 (Clause 10), baud rate(s): 9600, 19200, 38400, 76800
-To-Point, modem, (Clause 10), baud rate(s): 9600, 19200, 38400, 76800
Device Address Binding Methods Supported
Is static device binding supported? (This is currently necessary for 2-way communication with MS/TP slaves and
certain other devices. XX Yes
*Networking Options
Router, Clause 6 - List all routing configurations, e.g., ARCNET-Ethernet, Ethernet-MS/TP, etc.
ARCNET-MS/TP, ARCNET-MS/TP-UDP/IP
Character Sets Supported
Indicating support for multiple character sets does not imply that they can all be supported simultaneously.
XX ANSI X3.4
XX
XX ISO 8859-1
XX ISO 10646 (UCS-2)
XX ISO 10646 (ICS-4)
XX JIS C 6226
If this product is a communication gateway, describe the types of non-BACnet equipment/networks what the
gateway supports: Various protocols, depending on which firmware is loaded.
Unit Ventilator
Integration Guide
Foreign Device
lause 9), baud rate(s): 9600, 19200, 38400, 76800
36
CARRIER CORPORATION ©2019
All rights reserved