Drip Stop Function; Cleaning And Maintenance; Cleaning After Every Use; Cleaning The Coffee Bean Chute - Philips Grind & Brew HD7753 Manual

Hide thumbs Also See for Grind & Brew HD7753:
Table of Contents

Advertisement

5 Select the desired coffee strength (mild, medium or strong (Fig. 26)).
6 Press the program button to save the settings (Fig. 27).
-
The program button lights up continuously.
-
The clock time appears on the display.
7 To interrupt the process, press the program button again.
-
The program button light goes out.
Note: If you want to change the set timer time, press the program button. The program button
indicator starts flashing again. Now you can set the new timer time by pressing the hour and minute
buttons.

Drip stop function

The drip stop function enables you to remove the jug from the coffeemaker before the brewing
process is finished. When you remove the jug, the drip stop stops the flow of coffee into the jug.
Note: The brewing process does not stop when you remove the jug. If you do not put the jug back in
the appliance within 20 seconds, the filter basket overflows.

Cleaning and maintenance

Cleaning after every use

Never immerse the appliance in water or any other liquid, nor rinse it under the tap.
1 Remove the mains plug from the wall socket.
2 Wipe the outside of the coffeemaker with a damp cloth.
3 Clean the filter basket and the permanent filter with hot water and some washing-up liquid or
clean them in the dishwasher.

Cleaning the coffee bean chute

You have to clean the coffee bean chute every 1 to 2 weeks, depending on the frequency of use.
1 Put the mains plug in the wall socket.
2 Press the start/standby button (Fig. 2).
Note: Make sure that the light in the pre-ground button is off.
-
The display lights up.
-
The grinder starts working
3 Press the start/standby button and then remove the mains plug from the wall socket.
4 Insert the flat end of the bean chute cleaning brush into the lock of the coffee bean chute and turn
the lock to the 'open' position (Fig. 28).
5 Open the lid of the coffee bean chute (Fig. 29).
6 Use the bean chute cleaning brush to brush ground coffee residues into the lower part of the chute
(Fig. 30).
-
The ground coffee residues fall into the filter basket.
Tip: Place a paper filter (no. 4) or the permanent filter in the filter basket to collect the ground
coffee (Fig. 12).
7 Close the lid of the coffee bean chute and turn the lock to the 'locked' position (Fig. 31).
English
11

Advertisement

Table of Contents
loading

Table of Contents