Using Pre-Ground Coffee; Setting The Timer - Philips Grind & Brew HD7753 Manual

English
10
-
When you press the strength button, it lights up briefly and the appliance beeps. The display
shows the selected coffee strength.
10 Press the start/standby button to start the brewing process (Fig. 19).
Keep away from the steam vent during brewing, as hot steam escapes through the
vent.
-
The grinder grinds the required amount of coffee beans.
-
The freshness indicator (cup symbol) flashes rapidly on the display until the brewing process is
finished (Fig. 20).
-
The coffeemaker beeps 5 times when the brewing process is finished.
11 Wait until the coffeemaker has stopped beeping before you remove the jug.
Note: After brewing, coffee drips from the filter basket for several seconds.
Note: The appliance switches off automatically when the brewing process is finished. The insulated
jug will keep your coffee hot.
-
The freshness indicator (cup symbol) flashes slowly on the display for 30 minutes after brewing,
to indicate that the coffee is fresh (Fig. 20).
12 To pour out coffee, turn the lid to the 'pour' position. In this position, the arrowhead on the lid
points to the 'pour' symbol on the rim (Fig. 21).
Note: To keep the coffee hot, always close the lid after pouring out.

Using pre-ground coffee

If you want to use pre-ground coffee instead of coffee beans, follow the steps below.
1 Follow steps 1 and 2 in section 'Using coffee beans'.
2 Put pre-ground coffee in the paper filter or in the permanent filter.
3 Close the filter basket holder.
4 Turn the lid of the jug by its lever to the ' closed/brewing' symbol on the rim. Put the jug in the
appliance.
5 Press the start/standby button.
-
The appliance beeps and the display lights up.
6 Press the pre-ground coffee button to switch off the grinder (Fig. 8).
-
The pre-ground coffee button lights up when you press it. When the grinder is switched off, the
number of cups and the strength setting are not shown on the display.
7 Follow steps 11 to 13 in section 'Using coffee beans'.

Setting the timer

The timer enables you to program the time for starting the coffee-making process.
1 Keep the program button pressed until the program button starts flashing and 0:00 appears on the
display (Fig. 22).
2 Press the hour button repeatedly to set the hour (Fig. 23).
-
The appliance beeps each time you press the button.
3 Press the minute button repeatedly to set the minutes (Fig. 24).
-
The appliance beeps each time you press the button.
-
The display shows the set timer time.
4 Select the number of cups you want to brew (Fig. 25).
Note: If you want to brew coffee with ground coffee, press the pre-ground coffee button to switch
off the grinder before you select the number of cups.