Bosch 15614 Operating/Safety Instructions Manual page 14

Bosch cordless hammer drill operating/safety instructions bm 2610925562 11-04
Table of Contents

Advertisement

Available languages

Available languages

BM 2609932519 11-06
INDICATORS, SYMBOLS AND MEANING
If the indicator lights are "OFF", the charger
is not receiving power from power supply
outlet.
If the green indicator light is "ON",
the charger is plugged in but the
battery pack is not inserted, or the
battery pack is fully charged and is being
trickle charged, or the battery pack is too hot
or cold for fast-charging. The charger will
Plug charger cord into your standard power
outlet. Before inserting battery pack, remove
protective cap, then insert battery pack into
charger (Fig. 12).
The charger's green indicator will begin to
"BLINK". This indicates that the battery is
receiving a fast charge. Fast-charging will
automatically stop when the battery pack is
fully charged.
When the indicator light stops "BLINKING"
(and becomes a steady green light) fast
charging is complete.
When you begin the charging process of the
battery pack, a steady green light could also
mean the battery pack is too hot or too cold.
BATTERY
PACK
INDICATOR
LIGHT
12/1/06
2:36 PM
CHARGING BATTERY PACK (1 HOUR CHARGER)
CHARGER
Page 14
switch to trickle charge, until a suitable
temperature is reached, at which time the
charger will switch automatically to fast-
charging.
If the green indicator light is
"BLINKING", the battery pack is
being fast-charged. Fast-charging
will automatically stop when the battery pack
is fully charged.
The purpose of the light is to indicate that the
battery pack is fast-charging. It does not
indicate the exact point of full charge. The
light will stop blinking in less time if the
battery pack was not completely discharged.
When the battery pack is fully charged,
unplug the charger (unless you're charging
another battery pack) and slip the battery
pack back into the tool handle.
To prevent fire or injury
!
WARNING
when batteries are not in
tool or charger, always place protective cap
onto end of battery pack. Protective cap,
guards against terminal shorting.
-14-
FIG. 12
BATTERY PACK
RELEASE TABS
PROTECTIVE
CAP

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1561832609

Table of Contents