Netio PowerPDU 4C Manual page 11

If your network uses a DHCP server, simply click the IP address in NETIO Discover to open the web
interface.
Without a DHCP server in the network, NETIO 4x defaults to the following IP address at its wired
Ethernet interface: 192.168.1.78 For the NETIO 4x device to be accessible, the controlling system
must use an IP address in the same subnet, such as 192.168.1.77.
Figure 3. Configuring the IP address in NETIO Discover
To change the IP address, click the value in the MAC address column, uncheck Enable DHCP and
specify the IP address, Subnet mask and Default gateway as required. After applying the settings,
NETIO 4x will be accessible at the specified address.
11