Installation; Commissioning - Zehnder Rittling ComfoSense C Series Manual

1. Press
BOOST.
2. Press or
3. Press .
4. Press or
5. Press
6. Display shows DONE.
Reset all settings and timers of the
schedules. The device resets all settings
to the factory defaults.
1. Press
BOOST.
2. Press or
3. Press .
4. Press or
5. Press
shows DONE.
4

Installation

Disconnect the ventilation unit from the
Always follow local safety regulations.
screws are tight.
1.
(if ordered) I with the plugs H and
screws G to the wall.
2. Fasten the wall frame A with the
casing (I) or mounting plate (E).
3.
4.
unit and the device.
5.
2x twisted pair, unshielded,
with the colour coding of the
30
. The display shows
to choose RESET.
. The display shows
to choose RESET.
6. Attach the device (B) (with the
window D) with the screws E to
the frame A.
7. Push the cover C into its place.
To replace, use any of the following
screws:
M2.2x 12 cross recess plan
5

Commissioning

DE
Turn ON the main power of the ventilation
unit. The device displays a sequence of
up. Each screen is displayed for 1 second.
1.
2.
3.
4.
5.
6. The communication status is
displayed.
17:00