Bypass - Zehnder Rittling ComfoSense C Series Manual

schedules the ventilation
schedules the ComfoCool*
function. (* Optional, if
3. Press .
4. Select EDIT, press
5. Press or
required days:
6. Press , the display shows
START.
or
7. Press
required START time (hours).
8. Press
9. Press or
required START time (minutes).
10. Press
shows END.
11. Press or
required END time (hours).
12. Press
13. Press or
required END time (minutes).
14. Press
15. Press or
required function setting.
16. Press
shows SAVED.
17. The display returns to the
step programmer. Add steps
if necessary using the same
procedure.
Delete a schedule or step
schedule or a single step from a
schedule. To delete all schedulers at
once use the RESET function.
.
to choose the
to choose the
to choose the
to choose the
to choose the
to choose the
1. Press or
wanted scheduler, the display
shows SCHED:
SCHED +
SCHED +
2. Press .
3.
4. Press or
step to delete:
1...2 deletes the selected step
from the scheduler.
5. Press

3.10 Bypass

To set the heat recovery control of
duration.
the heat recovery control
OFF: the unit will increase
the heat recovery control to a
OPEN: the unit will decrease
the heat recovery control to a
air is supplied directly into the
dwelling).
to choose the
schedules
the ventilation
schedules the
ComfoCool
function.
.
to choose the
BYPA
27