ABB FSO-12 User Manual page 190

190 PROFIsafe
Configuring the communication when there is no safety program
If there is no safety program in the project, these instructions can help you to get the
communication working.
WARNING! Do not use this safety program in real safety applications. This
safety program is only an example which you can use only for trial purposes to
get the system up and running.
1. In SIMATIC Manager, right-click on the Blocks folder of the S7 Program of the
project.
2. Select Insert New Object, and add the following blocks to the program:
• Organization Block OB35 to call the safety program cyclically.
• Function Block FB1 using F-FBD language.
• Function FC1 using F-CALL language.
3. Double-click on the FC1 block.