Meaning Of Warnings And Symbols; Precautions For Installation; Prepare The Installation Of The Fan Coil Unit; Check That You Have All Optional Equipment - Daikin FWC06B7TV1B Installation Manual

1.3.1. Meaning of warnings and symbols

Warnings in this manual are classified according to their severity and
probability of happening.
Danger: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
Warning: Indicates a potentially hazardous situation which,
if not avoided, could result in death or serious injury.
Caution: Indicates a potentially hazardous situation which,
if not avoided, may result in minor or moderate injury.
Notice: Indicates situations that may result in damage to
equipment or property.
Information: This symbol identifies useful information, but
no hazardous situation warnings.
Some types of danger are represented by special symbols:
Electric current
Danger of burning or scalding

Precautions for installation

Precautions for installation
2 Precautions for installation
All instructions described in this manual shall be carried out by a
licensed installer.
Install the unit according to the instructions in the included
documentation and the manuals of the additional equipment (e.g.
controller). Improper installation could result in electric shock, short-
circuit, leaks, fire or other damage to the equipment.
Be sure to wear adequate personal protection equipment (protection
gloves, safety glasses) when performing installation, maintenance or
service to the unit.
If not sure of installation procedures or operation of the unit, always
contact your local DAIKIN dealer for advice and information.
Danger: electric shock
Switch off all power supply before removing the control box
cover or before making any connections or touching
electrical parts.
To avoid electric shock, be sure to disconnect the power
supply 1 minute or more before servicing the electrical
parts. Even after 1 minute, always measure the voltage at
the terminals of main circuit capacitors or electrical parts
and, before touching, be sure that those voltages are
50 V DC or less.
Danger: high temperature
Do not touch the water piping or internal parts during and
immediately after operation. The piping and internal parts
may be hot or cold depending on the working condition of
the unit.
Your hand may get burned or frostbitten if you touch the
piping or internal parts. To avoid injury, give the piping and
internal parts time to return to normal temperature or, if you
must touch them, be sure to wear adequate protective
gloves.
FWC
Fan coil units
4PW64525-1B – 2014.03
Precautions for installation
3 Prepare the installation of the fan coil

Prepare the installation of the fan coil unit

Prepare the installation of the fan coil unit
unit
Prepare the installation of the fan coil unit
3.1.

Check that you have all optional equipment

Mandatory equipment per fan coil unit: Each fan coil unit must be
equipped with one of these decoration panels.
Decoration panel Identification code
Decoration panel - BYCQ140CW1
standard
Decoration panel - BYCQ140CW1W
white
Mandatory equipment: Each fan coil unit must be connected to at
least one of the listed controllers.
Controllers Identification code
Electronic remote BRC7F532F
controller - wireless
(cooling and heating)
Electronic remote BRC7F533F
controller - wireless
(cooling only)
Electronic remote BRC315D7
controller - wired
Central remote
DCS302CA51
controller
Intelligent touch
DCS601C51C
controller
Unified ON/OFF DCS301BA51
controller
(a)
For installation of these options, an installation box option kit may be required. See
option list in the data book for more information.
Optional Equipment to extend the life of your product
Air handling Identification code
options
Sealing member of KDBHQ55C140
air discharge outlet
Long-life KAFP551K160
replacement filter
Fresh air intake kit KDDQ55C140
Description
Decoration panel for
the fan coil unit with
normal sealing
colour.
Decoration panel for
the fan coil unit with
white sealings.
Description
Wireless remote
controller to control
each fan coil unit
independently with
cooling and heating
functionality.
Wireless remote
controller to control
each fan coil unit
independently with
cooling functionality
only.
(a)
Wired remote
controller to control
each fan coil unit with
cooling and heating
functionality.
(a)
Remote controller for
centralized control of
all connected units.
(a)
Advanced remote
controller for
centralized control of
all connected units.
(a)
Remote controller to
switch all connected
units ON or OFF.
Description
Blocking parts to
close one or more air
outlets of the fan coil
unit.
High quality filter.
Kit which can be
connected to the
ventilation system in
order to supply fresh
air to the fan coil unit.
Installation manual
2