Changing The Control Settings; Removing The Door Shelf Fronts - Whirlpool 4ED27DQ Use And Care Manual

Changing the control settings
If you need to adjust temperatures in
9 Adjust the Refrigerator Control first.
refrigerator or freezer, use the settings listed
l
Wait at least 24 hours between adjustments.
in the chart below as a guide.
. Then adjust the Freezer Control if needed.
RECOMMENDED
CONDITION: REASON:
CONTROL SETTINGS:
Refrigerator
l
Door opened often
Refrigerator 4
section
l
Large amount of food added
Freezer
A
too warm
l
Room temperature too warm
Freezer
l
Door opened often
Refrigerator 3
section
l
Large amount of food added
Freezer C
too warm
l
Very cold room temperature
(can't cycle often enough)
Refrigerator
l
Controls not set correctly
Refrigerator 2
section for your conditions
Freezer
B
too cold
Ice not
made fast
enough
Both
sections
too warm
l
Heavy ice usage
l
Very cold room temperature
(can't cycle often enough)
l
Door opened often
l
Large amount of food added
l
Very warm or very cold room
temperatures
Refrigerator 3
Freezer
C
Refrigerator 4
Freezer
B
Removing the door shelf fronts
Remove the door shelf fronts for easier
cleaning.
To remove shelf fronts:
1. Remove all items from the shelf.
2. Pull out on the inside tab at each end of
the shelf front.
3. Pull shelf front straight out.
To replace shelf fronts:
1.
Line up each end of the shelf front with
the button on the door liner wall.
2. Push shelf front straight back until it
snaps securely into place.
3. Replace items on the shelf.
9