Table of Contents
Advertisement
7.2.1 Codes and Standards
SAFETY STANDARDS.
ELECTROMAGNETIC COMPATIBILITY (EMC).
MECHANICAL STANDARDS.
7.3 MECHANICAL DATA
7.3.1 Weight
The UR11 net weight is 286 kg (630.5 lb).
7.3.2 Dimensions
The UR11 dimensions are presented at
UL 508C - power conversion equipment.
UL 8340 - insulation coordination including clearances and creepage distances for
electrical equipment.
EN61800-5-1 - safety requirements electrical, thermal and energy.
EN 50178 - electronic equipment for use in power installations.
EN 60204-1 - safety of machinery. Electrical equipment of machines. part 1: general
requirements.
Note: the final assembler of the machine is responsible for installing an safety stop device
and a supply disconnecting device.
EN 60146 (IEC 146) - semiconductor converters.
EN 61800-2 - adjustable speed electrical power drive systems - part 2: general
requirements - rating specifications for low voltage adjustable frequency AC power drive
systems.
EN 61800-3 - adjustable speed electrical power drive systems - part 3: EMC product
standard including specific test methods.
EN 55011 - limits and methods of measurement of radio disturbance characteristics of
industrial, scientific and medical (ISM) radio-frequency equipment.
CISPR 11 - industrial, scientific and medical (ISM) radio-frequency equipment - electro-
magnetic disturbance characteristics - limits and methods of measurement.
EN 61000-4-2 - electromagnetic compatibility (EMC) - part 4: testing and measurement
techniques - section 2: electrostatic discharge immunity test.
EN 61000-4-3 - electromagnetic compatibility (EMC) - part 4: testing and measurement
techniques - section 3: radiated, radio-frequency, electromagnetic field immunity test.
EN 61000-4-4 - electromagnetic compatibility (EMC) - part 4: testing and measurement
techniques - section 4: electrical fast transient/burst immunity test.
EN 61000-4-5 - electromagnetic compatibility (EMC) - part 4: testing and measurement
techniques - section 5: surge immunity test.
EN 61000-4-6 - electromagnetic compatibility (EMC)- Part 4: testing and measurement
techniques - section 6: immunity to conducted disturbances, induced by radio-frequency
fields.
EN 60529 - degrees of protection provided by enclosures (IP code).
UL 50 - eEnclosures for electrical equipment.
Figure 7.1 on page
7-4.
Technical Specifications
UR11 | 7-3
7
Advertisement
Table of Contents
