Table of Contents
Advertisement
General Instructions
2.4 IDENTIFICATION LABEL FOR THE UR11
There are two identification labels, one located at the front cover and another inside the UR11 enclosure, close
to the fans.
Rated input data (voltage, input phase
numbers, rated currents for Normal Duty
2
(ND) and Heavy Duty (HD) cycles, overload
current for 1 min and 3 s and frequency)
Current specifications for use with the
Current specifications for use with the
2.5 HOW TO SPECIFY THE UR11 MODEL (SMART CODE)
In order to specify the UR11 model it is necessary to indicate the desired voltage and current values in their
respective fields for the nominal supply voltage and the rated input current for normal duty overload (ND) in
the smart code according to the example of the
2-8 | UR11
UR11 Model
WEG part number
UR11 Net weight
Normal Duty (ND) cycle
Heavy Duty (HD) cycle
Figure 2.7 - UR11 identification label
Figure 2.8 - Location of the identification labels
Manufacturing date
Maximum surrounding air
temperature
Serial number
Rated output data (voltage, rated currents
for use with Normal Duty (ND) and Heavy
Duty (HD))
Table 2.1 on page
2-9.
Advertisement
Table of Contents
