Specifications - Fluke TS 90 User Manual

TS90 Cable Fault Finder
Users Guide

Specifications

Power
Reverse
Battery
Protection
Input
Protection
Moisture
Impedance
Range
Maximum
Length
Representative
Maximum
Cable Length
Minimum
Length
30
4 AA alkaline batteries, provide 50 hours
of operation
No damage to the tester will occur if the
batteries are installed backwards.
250 V rms ac, continuous with transient
<1500 Vpk
If the tester is exposed to water, some
may get inside, but it will suffer NO
DAMAGE. See the moisture notes in the
Maintenance section.
35 to 330 with auto-compensation
within this range. Cables with an
impedance outside this range will not be
properly tested and may produce erratic
or incorrect readings.
2500 feet on most cable types, and 500
feet on very lossy cables. The tester will
display –Err if the cable is too long to be
correctly measured.
2500 feet: CAT-5 Twisted Pair
2000 feet: 12/2 ac Wire
1000 feet: RG-6/U TV Coax
500 feet (150 meters): RG-174/U Coax
No minimum length Minimum non-zero
reading is 2 feet