Silvercrest SPDP 18 A1 Manual page 47

Dual Mono
This sets how the two-channel audio is transmitted from the
AV OUT socket .
u
Stereo: A stereo signal is transmitted via the left and right speakers or
via the AV OUT socket .
u
L-Mono: The left mono channel is transmitted from both speakers or
the AV OUT socket .
u
R-Mono: The right mono channel is transmitted from both speakers or
the AV OUT socket .
u
Mix-Mono: The left and right mono channels are transmitted as a
mono signal from both speakers or the AV OUT socket
Dynamic
The Dynamic setting allows you to adjust the volume difference
between soft and loud passages on a scale from OFF to FULL in nine
steps .
OFF: The sound is played back unchanged . Loud passages are re-
produced loudly and quiet passages are reproduced quietly .
FULL: The volume difference is minimised, i .e . loud passages are
quieter and quiet passages are louder .
Video Setup menu
- - Video Setup Page - -
Sharpness
Brightness
Contrast
Hue
Saturation
Go To Video Setup Page
Please note that the settings made in this menu only apply to the
DVD player A and do not affect the second monitor B .
SPDP 18 A1
.
u
Med
00
00
00
00
Sharpness
Here you can change the sharpness of the image to one of the three
preprogrammed settings (High, Medium, Low) .
Brightness, contrast, hue, saturation
♦ Use the navigation keys
♦ Press ENTER to confirm your selection and enter the setting mode .
5^
♦ Use the navigation keys or
♦ Confirm the set value by pressing ENTER
and the setting mode is exited .
Preference Setup menu
- - Preference Page - -
TV Display
Audio
Subtitle
Disc Menu
Default
Go To Preference Page
The Preference Setup menu is not available during playback . First
stop playback by pressing the STOP button
TV Display
If you connect the DVD player A to a television, you can set the
colour format of your television here .
PAL TV: This colour format is used in most European countries
AUTO: Automatic recognition of the format to be used
NTSC TV: This colour format is common in North America
to select the setting to be changed .
5*
to select the desired value .
5*
. The setting is saved
5^
PAL
GER
GER
GER
twice .
5(
GB │ IE │ ■
37