Download Print this page

Using The Self-Cleaning Cycle - Whirlpool SF350BEG Use & Care Manual

Self-cleaning gas range 4.65 cubic foot oven
Hide thumbs

Advertisement

USING THE SELF-CLEANING CYCLE

S
ETTING THE CONTROLS
1.
Press AUTO CLEAN.
The clean indicator light will light up.
This will automatically set a 3
Self-Cleaning cycle.
NOTE: There will be a 30-minute cool-down
1
hour before the cycle is over.
2
2.
Set the cleaning time (optional).
If you want a Self-Cleaning cycle longer or
shorter than 3
1
2
pads to set the cleaning time you want. Press
the "up" (s) or "down" (t) pad(s) until a time
between 2
1
-4
1
2
2
display.
Use 2
1
hours for light soil.
2
1
1
Use 3
-4
hours for average to heavy soil.
2
2
3.
Start the oven.
The on and heat indicator lights will light up.
NOTES:
Make sure the door is closed all the way. If the
door is open even a little, it will not lock. If the
door is closed, it will lock after you press
START/ENTER.
Do not attempt to open the oven door while
locking.
4.
After the Self-Cleaning cycle starts:
The door locked indicator light will light up when
the oven door locks.
5.
After the Self-Cleaning cycle ends and the oven
reaches normal baking/roasting temperatures:
The clean, door locked, and on indicator lights
will go out and the door unlocks.
Press OFF/CANCEL to clear the display.
20
1
-hour
2
hours, use the hour and minute
hours shows on the
PRESS
YOU SEE
AUTO
CLEAN
PRESS
YOU SEE
(example for 4
cleaning time)
PRESS
YOU SEE
START
ENTER
5 SEC
YOU SEE
PRESS
OFF
CANCEL
ON
ON
1
-hour
2
ON
ON

Advertisement

loading

  Related Manuals for Whirlpool SF350BEG