Shock Absorbers Adjustment - VESPA GTS Supertech 300 hpe Manual

Shock absorbers adjustment (02_08, 02_09)

Spring pre-loading can be regulated on four positions using a special shock absorber
wrench, turning the ring nut at the bottom of the shock absorbers.
Position 1: minimum pre-load: rider only
Position 2 medium pre-loading: rider only
Position 3 medium pre-loading: rider and passenger
Position 4: maximum pre-loading: rider, passenger and luggage.
02_08
Spring pre-loading increases by turning the ring nut towards «A», but decreases if the
ring nut is turned towards «B».
CAUTION
RIDING THE VEHICLE WITH THE SPRING PRE-LOADING NOT CORRECTLY SET
FOR THE RIDER AND POSSIBLE PASSENGER, COULD REDUCE THE COM-
FORT OF THE RIDE AND THE PRECISION OF THE STEERING.
02_09
WARNING
WE RECOMMEND WEARING GLOVES WHILE CARRYING OUT THIS OPERA-
TION IN ORDER TO AVOID INJURIES.
WARNING
IT IS ABSOLUTELY FORBIDDEN TO ADJUST THE PRE-LOAD DIFFERENTLY ON
THE TWO SHOCK ABSORBERS
66