Shock Absorbers Adjustment - VESPA LX 150 i.e. Manual

Characteristic
Front tire pressure
1,6 bar (23.2 psi)
Rear tyre pressure
2,0 bar (29 psi)
Rear tyre pressure (with passenger)
2,8 bar (41 bar)

Shock absorbers adjustment (03_02, 03_03)

The preload of the spring can be adjusted to 4 positions using the ring nut located in
the lower part of the shock absorbers and the specific spanner supplied.
Position 1: minimum preload: rider only
Position 2 medium preload: rider only
Position 3 medium preload: rider and passenger
Position 4: maximum preload: rider, passenger, and luggage.
03_02
In order to carry out this operation you will need to use the specific spanner in the kit.
Spring preload increases by turning the ring nut towards «A», but decreases if the ring
nut is turned towards «B».
CAUTION
RIDING THE VEHICLE WITH THE SPRING PRELOADING NOT CORRECTLY SET
FOR THE RIDER AND POSSIBLE PASSENGER, COULD REDUCE THE COM-
FORT OF THE RIDE AND THE PRECISION OF THE STEERING.
36