Intended Use - DeWalt D25981 Original Instructions Manual

Electrical Safety
The electric motor has been designed for one voltage only.
Always check that the power supply corresponds to the voltage
on the rating plate.
Your D WALT tool is double insulated in accordance
e
with IEC60745; therefore no earth wire is required.
If the supply cord is damaged, it must be replaced by a
specially prepared cord available through the D
service organisation.
Mains Plug Replacement
(Middle East and Africa)
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in the plug.
• Connect the blue lead to the neutral terminal.

WARNING: No connection is to be made to the
earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 13 A.
Using an Extension Cable
If an extension cable is required, use an approved 3–core
extension cable suitable for the power input of this tool (see
Technical Data). The minimum conductor size is 1.5 mm
maximum length is 30 m.
When using a cable reel, always unwind the cable completely.
Package Contents
The package contains:
1 Breaker
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Date Code Position (Fig. A)
The date code , which also includes the year of manufacture,
19
is printed into the housing.
Example:
2017 XX XX
Year of Manufacture
Description (Fig. A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
On/off switch
1
Side handle(s)
2
Tool retainer
3
Tool holder
4
Handle screws
5
WALT
e
Air vents
6
Optional accessories (Fig. C)
Various types of 28 mm hex. chisels are available as an option.
Pointed chisel
7
Cold chisel
8
Scaling tool
9
Spade chisel
10
Asphalt cutter
11
Driver ground rod
12
Shank tamper
13
Plate tamper
14
Consult your dealer for further information on the
appropriate accessories.

Intended Use

Your breaker has been designed for professional heavy duty
; the
2
demolition, chipping and chasing applications in concrete, brick,
stone and other masonry materials.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
These demolition hammers are professional power tools.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
Soft Start Feature
The soft start feature allows the impact rate to build up more
slowly, thus preventing the chisel or point from "bouncing"
around on the masonry when starting up.
Fully Vibration-dampened Handles (Fig. A)
The dampers in the handles
transmitted to the user. This improves user comfort during
the operation.
Active Vibration Control
The active vibration control neutralises rebound vibration from
the hammer mechanism. Lowering hand and arm vibration,
it allows more comfortable use for longer periods of time and
extends the life of the unit.
English
2 absorb the vibrations
7