Care And Cleaning - Atag VA6311LT User Manual

Table of Contents

Advertisement

Available languages

Available languages

30
Programme
1)
2)
1) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
2) This is the standard programme for test institutes. With this programme you have the most efficient use of water
and energy consumption for crockery and cutlery with normal soil. Refer to the supplied leaflet for test information.
Consumption values
Programme
The water pressure and temperature,
the variations of the mains supply and

Care and cleaning

To remove and clean the filters
Dirty filters decrease the washing results.
Although the maintenance is very low with
these filters, make a check at intervals and
if necessary, clean them.
1. Turn the filter (A) counterclockwise and
remove it out from filter (B).
Type of soil
Normal soil
Crockery and cutlery
Fresh soil
Crockery and cutlery
Normal soil
Crockery and cutlery
Use this programme to quickly rinse the
dishes. This prevents the remaining food
to bond on the dishes and bad odours to
come out from the appliance.
Do not use detergent with this pro-
gramme.
Programme time (mi-
nute)
120 - 130
105 - 115
30
130 - 140
12
Type of load
Prewash
Wash 65 °C
Rinses
Dry
Wash 60 °C
Rinse
Prewash
Wash 50 °C
Rinses
Dry
Rinse
Energy (kWh)
1.8 - 1.9
1.6 - 1.8
0.8
1.0 - 1.1
0.01
the quantity of dishes can change the
consumption values.
C
B
2. Filter (A) has two parts. To disassemble
the filter, pull them apart.
Programme description
Water (litre)
19 - 21
19 - 21
9
13 - 14
4
C
A

Advertisement

Table of Contents
loading

Table of Contents