Coil Piping and Connections
For stacked coils, see typical configuration in
Figure 53. Typical piping for Type 5A, 5W two-row, K, W 3- to 12-row, WE, D and DD stacked
Refrigerant Coil Piping
Note: Refer to the
Use
that connect the condensing unit to an evaporator coil. Refer to
Evaporator Piping" on page 60
See SS-APG002-EN Application Guide: Tube Size and Component Selection for TTA and TWA Split
Systems and SS-APG001-EN Application Guide: Tube Size and Component Selection for RAUC
Split Systems for more information.
56
water coils
"Responsible Refrigerant Practices!" section on page 2
handling refrigerants.
Figure 54
to determine the proper, relative sequence of the components in the refrigerant lines
Figure
53.
AV
AV
AV
MV
GV
GV
Drain
for more detailed schematics of evaporator piping.
for information on
"Examples of Field-Installed
CLCH-SVX03C-EN