Allen-Bradley ControlNet 1786-6.2.1 Planning And Installation Manual page 64

grounding, 3-6
installed in parallel, 2-9
installed in series, 2-8
installed in series and parallel, 2-10
L1 and L2/N, 3-7
low voltage directive, 3-5
mounting dimensions, 3-6
selecting where to mount, 3-5
using as a backup, 2-6
repeater configurations
installed in parallel, 2-9
installed in series, 2-8
installed in series and parallel, 2-10
RG6 cable, 2-3, 3-1
rightangle connector, 2-11, 2-18
S
segment, 1-1, 1-4
planning, 2-17
terminating, 3-18
strip tool
adjusting the cutting blades, B-1
changing the memory blade hold-
er, B-5
reversing/replacing cutting blades,
B-3
surge suppression, 2-16
T
tap, 1-1, 1-3, 2-18
determine number needed, 2-1
mounting, 3-2
to a universal mounting brack-
et, 3-3
using the body holes, 3-4
mounting dimensions, A-1
selecting where to mount, 3-2
terminators, 1-1, 1-4, 2-5
trunk cable, 1-1, 1-3
attaching cable connectors, 3-15
bend radius, 3-1
installing, 3-1
pull strength, 3-1
stripping, 3-10
terminating, 3-18
testing for shorts and continuity,
3-14, 3-17
wiring external to enclosures, 2-15,
3-1
wiring inside enclosures, 2-15, 3-1
trunkcable section, 1-1, 1-3, 2-4, 3-18
Index
U
universal mounting bracket
mounting dimensions, A-2
W
wiring
external to enclosures, 2-15, 3-1
inside enclosures, 2-15, 3-1
wiring guidelines, 2-15
Publication 1786-6.2.1 - April 1998
3