Allen-Bradley ControlNet 1786-6.2.1 Planning And Installation Manual page 52

3-20 Installing A ControlNet Cable System
Publication 1786-6.2.1 - April 1998
2. Connect the other end of the 1786-CP cable to the NAP on the
ControlNet communication interface installed in (or connected to)
your programming terminal.
ATTENTION: Do not use the 1786-CP cable as
shown below. These connections could result in
!
network failures.
do not use the 1786-CP cable to
connect your programming
device to ControlNet two ways
simultaneously
1786-CP
do not use the 1786-CP
cable to connect two
separate ControlNet
segments
1786-CP
do not use the 1786-CP cable
to connect a scanner or
adapter module to a PLC
processor
1786-CP
1786-CP
20140