Connecting Power And Relay Circuitry - Allen-Bradley ControlNet 1786-6.2.1 Planning And Installation Manual

Connecting Power And Relay Circuitry

1. Remove the terminal strip cover.
2. Connect power to the repeater.
1786-RPT
If you are using high voltage DC to power the 1786-RPT,
L1 is positive (+) and L2/N is negative (-).
Using the fault relay terminals?
yes
no
Installing A ControlNet Cable System
20743a-m
1786-RPTD
(+)
L1
L2/N
(-)
20744-m
Go to step:
3
4
Publication 1786-6.2.1 - April 1998
3-7