Mounting The Motor - Faulhaber 22 BX4 SC Series Technical Manual

Installation
4.1.2

Mounting the motor

Fig. 5:
1. Secure the front flange of the motor to a suitable surface using fastening screws (for
the screw size and torque, see Tab. 2).
2. Protect the fastening screws to prevent displacement due to the effect of heat.
3. If necessary, attach parts to the motor shaft.
Information on the used flange can be found in the product data sheet.
Tab. 2:
Motor series
22xx...BX4(S) SC
32xx...BX4 SC / SCDC
2622...B SC
1525...BRC
1935...BRC
3153...BRC
2214...BXT H SC
3216...BXT H SC
4221...BXT H SC
a) Motors of model series 2610...B SC are mounted at fastening points outside the motor diameter using a quad-
ratic flange.
2nd edition, 31-03-2020
Mounting example – 22xxBX4 SC series
Attachment specifications
Screw type Thread depth (mm) Max. tightening
M2 3.0
M3 4.0
a)
M2 3.5
M1.6 2.0
M2 3.0
M3 4.0
M2 2.5
M2 3.0
M3 3.0
torque (Ncm)
50
120
40
40
40
40
40
40
40
7000.05061, 2nd edition,
15
Radial motor load, max.
(N)
30
60
20
10
15
20
20
30
40
31-03-20207000.05061