Table of Contents
Advertisement
DACT-100A MAIN BOARD:
There are no user configurable jumpers on this Communicator.
P1
Ribbon Cable for connecting to Mircom Fire Alarm Control Panel (FACP).
P2
RS-485 Connection for future expansion.
P4
Connector for CFG-100 Configuration Module.
I2
Status Indicator LED for Telco Line #1; Red when the line is in use, Amber when there is a line fault and
OFF when the line is not in use.
I1
Status Indicator LED for Telco Line #2; Red when the line is in use, Amber when there is a line fault and
OFF when the line is not in use.
DACT-100A Main Board
CONNECTIONS AND SETTINGS
Page 3
Advertisement
Table of Contents
Need help?
Do you have a question about the DACT-100A and is the answer not in the manual?
Questions and answers