Page 2
SYSTEM CONFIGURATION & OPERATION The Mircom Digital Communicator is configured by connecting the CFG-100 Configuration Tool to P4 of the DACT-100A or UDACT-100A Main Board. Once connected, if no text appears immediately on the LCD screen, hit any key on the numeric keypad.
Page 3
Items accessible to Level II only ITEM Access Menu Category Menu Label Description Number Level Account (#1) Account ID #1 Assign 4-6 numeric Account ID to be identified with Account #1 monitoring station receiver. Account (#1) Dial-Prefix #1 (OPTIONAL) Set up-to-8-digits to be first dialed by DACT/UDACT when attempting to call Account #1 monitoring station receiver.
Warranty & Warning Information Warning Please Read Carefully Note to End Users: This equipment is subject to terms and conditions of sale as follows: Note to Installers This warning contains vital information. As the only individual in contact with system users, it is your responsibility to bring each item in this warning to the attention of the users of this system.
Page 5
Mircom shall not be liable for any delays, breakdowns, interruptions, loss, destruction, alteration or other problems in the use of a product arising our of, or caused by, the software.
(90) days, whichever is longer. The original owner must promptly notify Mircom Technologies Ltd. in writing that there is defect in material or workmanship, such written notice to be received in all events prior to expiration of the warranty period.
Products which Mircom Technologies Ltd. determines to be repairable will be repaired and returned. A set fee which Mircom Technologies Ltd. has predetermined and which may be revised from time to time, will be charged for each unit repaired.
Need help?
Do you have a question about the CFG-100 and is the answer not in the manual?
Questions and answers