Table of Contents
Advertisement
L2 Repair Document
8 NOTE for defective PCBAs
All the defective PCBAs should be sent to RSH. If RSH send defective PCBAs for L3 repair, please
DO follow the packaging requirement mentioned in TN14011.
9
Functional test
During the function test, the following items must be checked and validated.
1)
Cosmetic aspect of the handset,
2)
The Software Technical sticker state on the Board
3)
Switch on the handset
4)
Default welcome message
5)
Enter *#2886# at the dial mode to start the MMI test or using Smart Diagnosis Tool to do the test.
If you have any question or problem, please feel free to contact us
Thanks for your cooperation.
Rev.
1.0
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
2002D Level 2 Repair Document
TCL
Communication Ltd.
TCL Communication Ltd.
Global Customer Service TS Dept.
Mar. 20
th
, 2017
Page
33/33
Advertisement
Table of Contents
