L2 Repair Document
4 Disassembly and assembly 2002D
4.1 ESD Safety
a)
Do not start the disassembly process if without ESD protection, suggest sticking a warning poster
on the wall in the work room
b)
Below is the ESD set up for the workbench in the work room
c)
Make sure the personal ESD protection is ready before entering the work room
No.
1
2
Rev.
1.0
All rights reserved. Transfer, copy, use or communication of this file is prohibited without authorization.
item
ESD glove
ESD smock
2002D Level 2 Repair Document
TCL
Communication Ltd.
Picture of sample
Page
16/33